Last modified by Kevin Austin on 2018/11/29 05:19

From version < 19.1 >
edited by Kevin Austin
on 2018/10/23 04:40
To version < 19.2 >
edited by Kevin Austin
on 2018/10/23 05:02
< >
Change comment: There is no comment for this version

Summary

Details

Page properties
Content
... ... @@ -80,7 +80,7 @@
80 80  [[image:topology_empty.jpg||height="318" width="500"]]
81 81  
82 82  
83 -Toggle Controller Features - Set to True
83 += Toggle Controller Features - Set to True =
84 84  
85 85  In a browser window, open the Swagger interface: http:~/~/127.0.0.1:8080
86 86  \\Username: kilda
... ... @@ -169,4 +169,18 @@
169 169  mininet>
170 170  )))
171 171  
172 +Verify Topology in GUI
173 +
174 +Verify in the OpenKilda GUI that the topology was created, in a browser go to: http:~/~/127.0.0.1:8010/openkilda/topology or refresh the window that you had open previously. You should now see that 3 switches and 2 links are present. You can rollover the switches or the links connecting them to get their information. For refrence, OpenKilda considers any port connected to another switch an "ISL". OpenKilda does not display "hosts" or computers in the topology, ports that are connected to hosts are termed "ports" in OpenKilda. We have built the following topology with mininet:
175 +
176 +s1 (spine switch) switch ID: 00:00:00:00:00:00:00:01
177 +ISL Link: Port 1 is connected to Destination port 2 of 00:00:00:00:00:00:00:11
178 +ISL Link:  Port 2 is connected to Destination port 2 of 00:00:00:00:00:00:00:21
179 +\\s1r1 switch ID: 00:00:00:00:00:00:00:11
180 +ISL Link: Port 2 is connected to s1 Switch ID: 00:00:00:00:00:00:00:01
181 +Port Link: Port 1 is connected to h1r1
182 +\\s1r2 switch ID: 00:00:00:00:00:00:00:21
183 +ISL Link: Port 2 is connected to s1 switch ID: 00:00:00:00:00:00:00:01
184 +Port Link: Port 1 is connected to h1r2
185 +
172 172  
©2018 OpenKilda